The purpose of this study is to investigate bending moment and the axial load capacity of a pressurized pipe suffering from a through-wall circumferential crack repaired by a composite sleeve. The three-dimensional finite element method (FEM) was adopted to compute the results, and the failure assessment diagram (FAD) was employed to investigate the failure behavior of the repaired pipe. The fi...

According to the wide application of segmental lining in mechanized tunneling, recognizing the behavior of segmental lining joints is important in tunnels designing. In the structural analysis of the tunnel segmental lining, segmental joints can be considered as elastic joints, and their stiffness characteristics are affected by the rotational, shear, and axial stiffness. The purpose of this wo...

tehran shomal highway passes through alborz mountains with a tunnel length of 6400 meters. there are two main tunnels. a full three-dimensional (3d) numerical analysis coupled with elasto-plastic material models was conducted on the inclined access tunnel. bending moment, axial force and the lining displacements due to the internal forces applied on the shotcrete lining are calculated. axial fo...

Although segmental tunnel linings are often used for seismic areas, the influence of segment joints on the segmental lining behavior under seismic loading has not been thoroughly considered in the literature. This paper presents the results of a numerical study investigating the effects of the rotational, axial, and radial joint stiffness of the longitudinal joints on the structural force...

this study was aimed to investigate the bending moment and stress (inner and outer corners) in lshaped biscuit joint made of solid wood, particleboard and medium density fiberboard (mdf). for this purpose, l-shaped joints made of beech and fir, particleboard and mdf by biscuit size numbers of 0 (47×15×3.8 mm), 10 (53×19×3.8mm) and 20 (60×23×3.8mm). bending moment and stress carrying capacity of...

this paper is about discrete sensitivity analysis. a triangular bending element with constant moment and six degrees of freedom is used. the required derivatives for sensitivity analysis are calculated explicitly. these formulations, finite element method and sequential linear programming are utilized to find shape optimization of plate bending structures. the numerical examples, which show the...

in soft soil areas, equal-length piles are often adopted in the retaining system. a decrease in the bending moment value borne by the retaining structure along the pile depth (below the excavation bottom), leads to an inadequate use of the pile bending capacity near the pile bottom. this paper presents retaining systems with long and short pile combinations, in which the long piles ensure integ...

the joints between segmental rings can withstand a certain amount of bending moment as well as axial and shear forces. generally, in the structural analysis of tunnel segmental lining, the joints can be modeled as elastic hinges or rotational springs, and their rigidity should be demonstrated in terms of the rigidity of the joints or their rotational stiffness. therefore, the bending moment act...

Four-roll bending process is usually used for manufacturing of seamed thick-walled and thin-walled cylinders. Due to complexity of this process, the analytical solution of plate bending in this process has not been developed completely. The existence of friction and multi-step processing makes it more difficult. Investigation of four-roll bending process using analytical and numerical methods i...

BACKGROUND Techniques for the skeletal attachment of amputation-prostheses have been developed over recent decades. This type of attachment has only been performed on a small number of patients. It poses various potential advantages compared to conventional treatment with a socket, but is also associated with an increased risk of bone or implant-bone interface fracture in the case of a fall. We...